South Bend 9B Closer for 3c/1A Collets?

[ThomasRodCo]

Hello, new here. I have a vintage South Bend 9B and need to find a collet closer for my 1A/3C collets I've recently purchased.
My lathe came with a set of 3AT collets and a closer, which I'm reading were for Atlas not SB, but the closer is too short with the gear door closed, and I also don't have a 3AT adapter to use the collets anyway.
Problem I'm finding when looking for the correct SB closer is there are many different looking closers out there that say they work, but I'm hoping to get some conformation before buying one.
One of the closers I've seen is marked "HW-101".
Does anyone know if that is the correct one?
I've also seen closers marked HW-103 that say they are 3c closers as well.
thanks,
Steve

 

[neanderthal mach]

Not trying to be a dick, but did you bother to scroll through the list of forums here? There is a South Bend specific forum where somebody there who does know might not see your post. https://www.practicalmachinist.com/forum/categories/south-bend-lathes.25/

 

[ThomasRodCo]

Yes I certainly did bother. I went down the list but didn't see a SB specific forum.
I'll find it and re-post there.

 

[ThomasRodCo]

Unless an admin moved it, it was apparently already in the SB forum..