Arno
Stainless
- Joined
- Feb 5, 2003
- Location
- Toronto, ON
May I suggest you spell out what you consider the Z axis.
Before CNC, Deckels shipped with the vertical head as an otional attachment thusly the ram travel was the Z axis.
Once CNC machines were shipped they designated the vertical axis as the Z.
MAHO remained with the horizontal axis Z designation.
--
Cheers,
Arno
Before CNC, Deckels shipped with the vertical head as an otional attachment thusly the ram travel was the Z axis.
Once CNC machines were shipped they designated the vertical axis as the Z.
MAHO remained with the horizontal axis Z designation.
--
Cheers,
Arno