A friend worked as an engineer in light truck development at Ford in the last half of the 70s. Lot of time spent on the future Ranger small truck..
Original design criteria included a twin I beam front end. Someone came up with the idea of using the Fox platform front suspension. Advantages...
A mag drill has a relatively wobbly spindle compared to a mill spindle. You didn't mention the hole size, but if it is in the range of spade drills as made by Allied Machine then that's the way I'd go. Use a pointed insert to start the hole and finish with a flat bottom insert which can be...
Check pricing on tool flo top notch inserts at Carbide Depot. On -3 size inserts looks like around ,$13-$14 for UN or UNJ to about $17 for Acme with most groovers in the middle of that range.
As it was explained to me when I added a BTR card to an Okuma lathe with a 3000 series control about 20 years ago, Okuma used a floating ground. IIRC, the explanation of that term was that, instead of 5V and 0V, a circuit could be operating on 15V and 10V. Still the same 5V difference, but not...
I agree anything you can do to take the coolant out of the air before it gets to the a/c system is one of the best things you can do. More healthy for the employees, saves money on coolant, less a/c maintenance due to coolant glop on coils and in drain pans, and decreased cost of operation of...
A few basics of A/C for a machine shop.....
Cooling the building itself is pretty straightforward. Simple heat survey taking into account the construction and insulation of the building, just the same as any other building whether it be a house, store, church, or any other building.
The...
My mom was in a hospital based RN program in the 1940's. In some biology class they had to collect some dirt sample and grow it out and then identify any bacteria present.
So, she goes down to the basement of the hospital, reaches the top of a door casing and collects some dust for her sample...
I'd be concerned in a situation like this that the replacement piece may be another cut off the same bar and I'd find the same problem again after investing a second $600.
Sunmight and Eagle both have equivalents to Trizact and both are popular in high end auto paint work. None of these products could be called cheap, but 3M's prices have risen to insane levels. That's the thing that has driven body and paint shops to find alternate products that do perform (as...
The rated output of a fluorescent tube is determined in lab conditions by testing it with a ballast having a ballast factor (BF) of 1.0. ie, the ballast is a perfect match for the tube being tested.
The industry average BF for fixtures on the market today is 0.87 so you lose 13% of your rated...
Dexamethasone is used primarily on patients who are on a ventilator. It is used to supress the patient's own immune response as they've learned the cytokene storm where the patient's body mounts an extreme response to the virus results in more damage to the patient's organs than the virus...
Had a neighbor when I lived in SC who was as as big as either of those women in the pic. Her daily routine consisted of continuously eating chips from a giant size bag and drinking cokes straight from a 2 liter bottle.
She quit both and with no other dieting or any sort of "program", she lost...
Thanks for demonstrating your ignorance of the difference between federal and state laws. Adds that much more credence to all the other blubbering slop you dredge up from your favorite lunatic fringe sites and post here as fact. Moron.
FWIW, that's an Illinois state law, and the IL state...
BLOCK | PracticeUpdate
This article, based on analysis of 1300+ samples, found the bulk of false positives were due to either contamination or tests of people who were already recovered but still had partial virus particles but no whole virus that could be cultivated. Overall, false positives...
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.